Last Modified: 11-29-2007 1.6 N
Service Category: Drivetrain Section: Automatic Transmission/Transaxle
Model Year: 2008 Model: Sequoia Doc ID: RM000002YBC00EX
Title: A750E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: ADJUSTMENT (2008 Sequoia)

ADJUSTMENT

1. INSPECT SHIFT LEVER POSITION A750E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: ON-VEHICLE INSPECTION (2008 Sequoia)+

2. ADJUST SHIFT LEVER POSITION

(a) Move the shift lever to N.

(b) Fold back the transmission control cable adjust case cover. Then while sliding the slider toward the cable end side, press the lock piece from the back side to release the lock.

(c) Check that the adjust case's spring is applying enough tension to the shift control cable. Then press the lock piece to set the lock.

NOTICE:

  • Use your hand to push the lock piece. Do not use any tools.
  • Securely push the lock piece so that the slider's protrusion is above the lock piece.

(d) Return the cover of the adjust case to its original position.

(e) Inspect the operation after the adjustment.